Indexing Shaped Tube Chain Conveyors

Our Indexing Chain Conveyors offer an alternative tube loading solution for shaped tubing.  Tubes are positioned on the chains by the operator, so the tube can be inspected and the weld-seam can be positioned for best cutting.  Up to 40 tubes can be staged for continuous cutting.

How it works:

1. Tubes are placed on the indexing chains. 
2. Operator can inspect and orient the tubes.
3. The chains advance tubes to the lift rolls.
4. V-rolls raise and rotate the tube.
5. Hydraulic pinch rolls push the tube into
   the cutoff machine.
6. The cutoff machine feeder grips and
   advances the tube.

Features & Benefits:

• Tube angle is aligned for the cutoff die
• Weld seam can be oriented.
• Urethane V-wheels protect the tube
  surface finish
• Open-front design for easy fork
  truck access
• Load new bundles while cutting
• Tube capacity 3/8" to 3" (2-3/4" square)
• Bundles up to 24 feet, 4,000 pounds
• Compatible with SC30 Tube Cutoff and
  RC30 Rotating-Head Cutoff

Dial Loader
Back To Shaped Tube Loaders Main Page