 |
||||||||||||||||||||||
|
Rotary-Head Tube Cutoff Machines
Hautau Rotary Cutoff Lathes can cutoff and chamfer both ends of tube or bar on one machine, in one chucking. Our unique dual-chucking design allows you to produce fully endfinished parts with no secondary operations.
You can machine tube grooves, weld-preps, radius edges, plus cut and chamfer solid bar stock up to 3” diameter.
Hautau Rotary Cut-off lathes feature servo tube positioning and dual hydraulic chucks with full-range jaws, so setups are always fast and short runs are no problem. Whether you run batches of 10 or 10,000 these machines are the best way to produce finished tubular components. …
- Tubes are held rigidly for best concentricity
- Precision chamfers cut on OD and ID on both ends, in one chucking
- Full-range chucks require no changeover
Watch new videos that show our RC machines and tube handling systems in operation.
Learn about our complete systems, including loading, cutting, sorting, inspection and packing.
Fast Setup, Easy to Use
With the Allen-Bradley® ControlLogix® as the standard, Hautau Rotary Cutoff lathes are easy to use and require no CNC programming. Setup, including chamfers and multiple lengths, typically takes less than five minutes.
RC15 Cutoff Lathe (1.5 inch)
RC30 Cutoff Lathe (3.0 inch)
RC50/60 Cutoff Lathe(6.7 inch)
RC80 Cutoff Lathe (9.1 inch)
Cutoff Machine Options
Lathe & Wheel Tooling
RC Tube Cutoff Lathes ...
- Require no collet or jaw changes
- Quiet rotating-head/stationary tube design
- Lathe-type cutters or rotary cutoff wheels
- Two-slide and four-slide headstocks
- Fast, pushbutton changeover for
diameter and length - Up to three lengths from each tube
- Cut bowed or bent tubes
- OD turn short parts
- Automatic remnant separation
